Inventory ID: 6C-135
UNUSED FLSMIDTH 40' x 25' (12,192mm x 7,620 mm) Gearless SAG Mill
Manufacturer: FL SMIDTH
Inventory ID: 6C-GR01
UNUSED METSO 38' x 25'5" F/F (11.58m x 7.76m F/F) SAG Mill with 19,400 KW (26,016 hp) 60 Hz Motor
Manufacturer: METSO
Inventory ID: 6C-134
UNUSED METSO 38' x 25'5" F/F (11.58m x 7.76m F/F) SAG Mill with 19,400 KW (26,016 hp) Motor
Manufacturer: METSO MINERALS
Inventory ID: 6C-AI01
UNUSED METSO 36' x 23' (11m x 7m) AG Mill with G.E. 15,000 kW (20,107 HP) motor
Manufacturer: METSO
Inventory ID: 6C-GAB02
UNUSED METSO 36' x 20.5' (10973mm x 6248mm) SAG Mill, 15,000 kW (20,107 HP) Gearless Motor Drive, 50 Hz
Manufacturer: METSO
Inventory ID: 6C-GM01
UNUSED F.L.SMIDTH (Fuller-Traylor) 36' x 17' Sag Mill with 13,500 kW (18355 HP) Wrap Around Drive
Manufacturer: FL SMIDTH
Inventory ID: 6C-MI01
UNUSED METSO 32' x 18.75' (9.75m x 5.71m) EGL SAG Mill with 15,416 HP (11,500 kw) twin-pinion variable speed drive
Manufacturer: METSO
Inventory ID: 6C-VI01
HARDINGE-KOPPERS 32' x 12' (9.75M X 3.66M) EGL SAG Mill, 6,800 HP dual drive (2 x 2,550 kw)
Manufacturer: HARDINGE-KOPPERS
Inventory ID: 6C-MI02
UNUSED OUTOTEC 24' x 17' (7.325m x 5.2m) EGL SAG Mill with 6,300 HP (4,750 kw) Variable Speed Drive
Manufacturer: OUTOTEC
Inventory ID: 6C-BA01
BOLIDEN - ALLIS CHALMERS 7.3m x 2.74m (24' x 9') SAG Mill with 3000 HP (2,237 kW) Motor
Manufacturer: BOLIDEN - ALLIS CHALMERS
Inventory ID: 6K-02
3 Units - HARDINGE 24' x 8' F/F (7.32m x 2.44m F/F) SAG Mills, No Motor
Manufacturer: HARDINGE
Inventory ID: 6C-HB02
UNUSED METSO 22' x 10.25' (6.7m x 3m) SAG Mill with 3,300 HP (2463 kW) ABB LSS Synchronous Motor with ACS 6,000 VFD & Liners & Liner Handler
Manufacturer: METSO
Inventory ID: 6K-03
3 Units - HARDINGE 22' x 7' F/F (6.7m x 2.13m F/F) SAG Mills, No Motors
Manufacturer: HARDINGE
Inventory ID: 6C-AM01
UNUSED NHI 20' x 21' (6.1m x 6.5m) SAG Mill with 3600 kW (4826 HP) motor
Manufacturer:
Inventory ID: 6C-SE02
ANI - FLSMIDTH 20' x 10' Sag Mill with 2500 HP Motor
Manufacturer: ANI
Inventory ID: 6C-231
MORGARDSHAMMAR 19.35' x 27.88' (5.9m x 8.5m) Pebble Mill, 3753 HP (2800 kW)
Manufacturer: MORGARDSHAMMAR
Inventory ID: 6C-BL01
NORDBERG/THUNE 6m x 7.7m (19'8" x 25'3")Autogenous Grinding Mill with (2)1250 kW (1675 HP) Motors
Manufacturer: NORDBERG/THUNE
Inventory ID: 6C-RC02
UNUSED OUTOTEC 18' x 30' (5.5m x 9.15m) SAG Mill with 4,500 kW (6,032 HP) drive
Manufacturer: OUTOTEC
Inventory ID: 6C-AP01
FULLER 18' x 10-1/2' SAG mill, rubber-lined with 1500 HP, 1192 RPM motor
Manufacturer: FULLER
Inventory ID: 6C-RR02
MORGARDSHAMMAR 5.2m x 6.6m (17' x 21.8') EGL SAG Mill with 1,800 kW (2413 HP) Motor, 4160 Volts, 1190 RPM
Manufacturer: MORGARDSHAMMAR
Inventory ID: 6C-RC01
VICKERS RUWOLT 5.3m x 5.6m (17'4" x 18'4") AG/SAG Mill with 2250 HP (1678 kW) drive
Manufacturer: VICKERS RUWOLT
Inventory ID: 6C-274
AEROFALL 17' x 5' Sag Mill with 600 HP motor
Manufacturer: AEROFALL
Inventory ID: 6C-275
Partially Refurbished AEROFALL 17' x 5' Sag Mill with 600 HP motor
Manufacturer: AEROFALL
Inventory ID: 6C-CR02
AEROFALL 17' x 5' Sag Mill with 800 HP motor and lube system
Manufacturer: AEROFALL
Inventory ID: 6C-205
MARCY 13'6" Diameter x 4' EGL (4.15m x 1.22m EGL) SAG Mill 300 HP (224 kW)
Manufacturer: MARCY
Inventory ID: 6C-KN01
HARDINGE KOPPERS 12' X 5' Sag Mill with 250 HP motor
Manufacturer: HARDINGE-KOPPERS
Inventory ID: 6C-RJ02
HARDINGE 6' X 2' Sag Mill, No Motor
Manufacturer: HARDINGE
Inventory ID: 6K-RA05
5' x 3' (1524mm x 914mm) SAG Mill with 20 HP motor
Manufacturer: UNKNOWN